Wednesday 20 April 2016

CAPCOM CPS2 ALL-IN-ONE BLACK MARVEL VS CAPCOM BATTERY CHANGE

Hey guys,

I've finally done it! I've finally grown the balls to tackle the battery change on my Capcom CPS2 All-in-one black metal case Marvel VS Capcom game. I've done a battery change on a regular CPS2 board, the plastic cased A board which you can do without the game connected but when it comes to the All-in-one games their different...

....you need to change the battery while the game is on!..

...WHILE IT'S TURNED ON!!!

haha, yeah that's why I've been putting off doing it. You need to keep the game on while you desolder the old battery and then solder in the new one. I mean, the process of changing the battery is super simple but doing it while the board is propped on its side so you can get easy access to the top and bottom makes it a lot more delicate. If you press too hard on anything the board will move, potentially slide and you can touch other parts of the board by accident with the soldering iron or your hand and short something. Or cause it to lose power, which while the battery is disconnected will just brick your game and it's phoenix time. Which is what I didn't want to happen.

So I set myself up as best as I could and did everything methodically and checked my work at each stage just because I wanted to be super careful and I love this game and really don't want to knacker it up.


Here you can see the offending battery, which to be honest was still in good shape. No leaking or bloating or anything. But it's been in there since 2011 and I wanted to get a fresh one in to help prolong the life of this game in it's original form.


Sorry this image is a screenshot from the video I made documenting my progress with this swap (see bottom of this post for video). I forgot to take a photo of it propped up as I was psyching myself up to go for the desolder haha. So this is how I had the game propped up. I electrical taped both sides of the edge of the board that's touching my hobby mat so that the game couldn't slide out from under itself. That would be pretty disasterous! And you can hopefully see its leaning against my plastic main soldering box. It's pretty heavy and with it leaning towards it the game can't fall forward as I work. And you can see the Jamma edge on there too.


And SUCCESS!!! Here you can see the game working with it's fresh new battery in place! WOO!! The actual swap was a simple job in the end, I was just super careful with how I put the solder sucker on there etc to desolder the old battery. I did have a little bit of a heart attack when I was cleaning the last bit of solder of one of the pads that looked like it might be obscuring a bit of one of the holes and it might make pocking one of the legs through a little tricky. I didn't realise but the games music had stopped! I looked over to my TV and the screen was frozen with the small Capcom logo in the middle bottom bit of the screen and the rest of the screen had a Patent number, Patent number text written all across the screen. I thought for sure it's dead and I'd moved the board too much or something. I was gutted. Well I finished putting the new battery in and trimmed its legs. Then I turned it off because I'd have to turn it off at some point to put the game away. And when I turned it back on the flippin' thing worked!! Man I was so happy! haha

So I did it! The battery change didn't take very long at all in the end and now I'd done it it's not that scary anymore. I must admit that I couldn't find much at all about changing the batteries on these boards just comments about doing it while the game is on. The only real posts I did find ended up being from a Blog written by the guy who owned this game! I bought it off him via Arcade Otaku. I recognised the scratches on the metal casing. So this game seems to be the poster boy for the battery swap :-P

Below is the video I made of the battery change each step of the way. Except for the actual battery swap. I was too scared to do that on video in case I messed it up worrying about talking on camera or if the camera was in focus or had fallen over etc.



So there you go, I wanted to post up something about the swap I did as information is fairly scarce on swapping out the batteries on these boards. And hopefully it'll help if you have an All-in-one and want / need to change the battery on it but don't really know how to go about it.

Good luck and see you soon

Porl''

Monday 11 April 2016

YES ANOTHER GAMEBOY....


So again it's been a while since I posted anything up on my Blog. The past few months have flown by and I've just bit-d and bob-d about with projects but haven't really got any finished during the time. It's a shame but I'm still super excited about retro gaming projects and still have several lined up. One major one I need to get to is changing the battery on my CPS2 all-in-one Marvel Vs Capcom board. The battery is pretty old on it and I need to grow the nerve up to change it. Apparently they work differently to normal CPS2 boards and you have to change it while the game is on and playing!! If theres no power and the battery gets taken out it dumps the encryption keys and thats it, you need to get it phoenixed! And I don't want that at all!

Anyway, what's the story with me getting another Gameboy!??! Well it was a bit random really, I'd been into my companies (where I work, I don't own it haha) RnD department on the scrounge for some AA's to run my DMG Gameboy and told them why I wanted them. They very kindly gave me some retro fuel cells for the Gameboy and then a few days later one of the guys from there came over to my desk and gave me his old Gameboy Color! For Free!!! Woo! It's been sitting in his loft and when he saw I was interested in playing them he thought someone should play it and just bought it in. Man I was stoked! And green is my favourite colour so its even better! It came with Star Wars pod racing in it which I haven't tried and Brain Training for Nintendo DS (Which I have been using to get my maths skills better than the crappy Graphic Designer stage they are at now haha).

The Gameboy isn't in mint condition or anything, it's been played and Im more than happy with that. The screen is scratched slightly but you don't see them when the game is on. Oh and the battery cover was missing. I don't understand how so many Gameboys have no battery covers?! Do the clips break on them or do kids just not put them back on when changing the batteries and they disappear? Anyway, I dropped £3.99 on amazon and got a repro cover and its now complete. :-)


And I've started working my way through Zelda : Links Awakening. It's really good so far and I've just entered the second dungeon ; Bottle Grotto. I've got a lot of game to play but It's very much a game I can pick away at I think. Also Im very impressed with the screen on the Gameboy Color. I didn't think the viewing angles etc would be improved over the DMG but it really is a step up! It's a lot easier to see in normal daylight. When it gets dark etc the game gets switched into the backlight DMG ;-)

Oh also, I got this game with some of my birthday money and I've started the trek into Dark Souls 2 on PS3. I've heard that it is a solid game and I've not really been interested in it for years, but I watched a Giant Bomb quick look on Dark Souls 3 and they completely hooked me. It actually looked really fun and the style, graphics and gameplay looked really good! So I dropped £6 and picked it up. Well, It IS FOOKING SOLID!! haha. I've played a few hours of it and Im totally stuck already. Its not a hand holder at all which is really interesting and Im determined to get further, it has definatly hooked me!

I've looked up a tutorial and I was heading into an area I'm no way near strong enough to go through yet which has been why I've died, and died and died etc etc etc over and over again :-P

Oh and I also have Metal Gear Solid V : The Phantom Pain to play through. Im super into MGS and Im really looking forward to getting some play time in on it, I think Dark Souls 2 needs to be done first though...we'll see.

So I thought I would drop an update and I need to get more projects finished.

Hopefully I'll have some actual finished stuff to show soon.

*fingers crossed*

Porl''